For those who want to sample the Jacuzzi lifestyle, inflatable tubs provide an excellent starting point. The drawback is that they don’t have many bells and whistles, which may make them really entertaining. Although they just create bubbles when the heat is turned off, there will be jets, so they can be therapeutically used.
Inflatable tubs may be used outside, although it’s not advised to be below a specific temperature. For climate specific spa information, https://www.watsons.com/florence/hot-tubs-spas can offer tips and advice for your location.
What are the primary dimensions and sizes of hot tubs?
Three sizes are often used to classify tubs: small, medium, and giant, or 8–12 seaters. With a general notion of the potential sizes and shapes of hot tubs, you can now measure the size that will fit in your yard before visiting a showroom or placing an online order.
The Shell
The water is contained within the shell. They come in a variety of sizes, shapes, and colors. The majority have seats built into the mold. Additionally, the shell features holes where jets may be added.
The water is agitated by the jets. It is typical for the shell to have an insulating coating on the bottom that aids in retaining heat.
Pumps
Within and outside of your tub, the pumps move water. They assist in running the water’s filtration system and jets. They serve as the central component of the filtration system in your tub.
The pumps filter and aid in warming the water when they run at a low pace. They are controlled by a thermostat and a spa pack. The pumps drive the jets while running at high speed. Steam at high pressure may be produced by manipulating the jets with the sauna pack air button.
Air is drawn via a nozzle, a narrowed portion of the jets, in order for them to function. The pressure created by this motion gives the individual seated in the spa a calming, massaging feeling.
Control panel and heating component for the spa pack
There is a controller and heater with the spa pack. The controller manages every aspect of tub operation, including heating, filtration, and jet activation. The spa becomes heated as water flows through the heater.
Filtration
Filters are essential because they maintain the cleanliness and clarity of the fluid in tubs. Regular cleaning and replacement of the spa’s filter are essential.
Topside Guidance
To adjust the water’s temperature, utilize the topside control. The lights, pumps, and blowers are all managed by the topside control in addition to the water temperature.
Oxidizers
In order to maintain the purest water possible, spa operators are using these more and more. They usually come as an add-on option. Installing one requires you to place it next to the heater that has been installed.
Ozone gas is produced by an ozonator and then injected into the water in your tub. By eliminating impurities from the water, ozone lowers the requirement for sanitizing agents.
UV light and corona discharge (https://www.sciencedirect.com/topics/engineering/corona-discharge) (CD) are the two forms of ozonators. Compact, more efficient, and longer-lasting are the characteristics of CD ozonators. With all of these capabilities, the CD Ozonator is the most popular.
Now that you are aware of the many sections and components of your tub, let’s discuss the various kinds of spas.
Types of Hot Tubs
Home spas are available in a wide variety of forms, dimensions, and styles, as we’ve just discussed. Among the most well-liked ones are:
- Transportable
- Wet-jetted
- Air-powered
- Wood-burning
- Expandable
- Transportable Hot Spring
Prefabricated home spas are another name for portable hot tubs. The term “portable” is a bit misleading because moving a portable home spa would involve a lot of hard lifting.
Portable hot tubs are available in a range of sizes and materials. They are often more energy-efficient and marginally less expensive than other varieties.
Installing one on the floor, in the ground, or both inside and outside of your house are your options. For a more personalized appearance, you may even construct decking around it.
Home Spas: Wet-Jetted vs Air-Jetted
The mechanics of these two kinds of hot tubs differ mostly from one another.
Hot tubs with air jets: This kind of home spa draws in outside air, heats it, and then exhales it within the hot pool. This implies that you will always be able to enjoy the sound of flowing water.
Hot tubs with water jets: Water jets collect the water in the tub and force it out of the jets at high pressure.
Wood-burning Home Spa
The concept of gravity powers a wood-fired home spa. An internal network of pipes surrounds a wood burner. Water rushes upward out of the top pipes into the tub as the fire heats the water inside the pipes. Cooler water enters the furnace through pipes that run from the tub’s bottom.